Mineraluxe - pH Plus

What it Does

Safely lowers pH and Total Alkalinity (TA) in hot‑tub water, using a fine, fast‑dissolving mineral acid (pH 1–2 in solution).

Why Use It

• Restores pH to the ideal 7.4–7.6 range

• Brings TA below 150 ppm

• Prevents bather discomfort, sanitizer loss, scale formation, cloudy water, and costly repairs

• Highest‑grade, granular formulation for quick, even dispersion

When to Use

• Whenever pH rises above 7.6

• Whenever TA exceeds 150 ppm

• Retest weekly and adjust as needed

How Much to Use

1 capful ≈ 10 g. Do not add more than 25 g per 1 000 L in a single application.

How to Apply

1. Run the pump with air controls off.

2. Sprinkle product slowly across the water surface.

3. Circulate for 1–2 hours.

4. Retest:

   • For pH, repeat dosing if still above 7.6.

   • For TA, drop levels gradually—no more than 10 ppm per day—and keep pH above 7.2 during adjustment.

Always wear gloves, measure carefully, and follow label directions for best results.